Setting up KS1 CKM system is simple!

Setting up KS1 CKM system is simple!

Congratulations on receiving your CKM system! It's time to set it up and start the journey. Let us walk you through the steps and you will be ready to go!

Step 1: Download

Scan the QR code on the box to download TestFlight. Follow the instructions to download SiJoy CKM APP Beta version and create your account.

  • Step 2: Clean

    Select an area on the back of your upper arm where the sensor will be applied. Clean this area with a sanitizing wipe and allow it to dry completely before proceeding.

  • Step 3: Unpack

    Peel the lid completely off the sensor pack, and then unscrew the cap from sensor applicator. At this point, the sensor pack and applicator are ready to be assembled.

  • Step 4: Assemble

    Place the sensor pack on a flat, stable surface and secure it with one hand to prevent unnecessary movement during assemble. Line up the sensor applicator with sensor pack, then press down firmly on the sensor applicator until it comes to a stop. Lift the applicator out of the sensor pack.

  • Step 5: Unlock

    Remove the clip on the applicator and place the applicator on the prepared area where the sensor will be worn.

  • Step 6: Apply

    Apply the CKM system onto your arm with single-click. Slowly pull sensor applicator away from the arm and make sure that the sensor is firmly attached.

  • Step 7: Connect

    Open the SiBio CKM APP and follow the instructions to pair it with your sensor. You can either scan the QR code on the box or manually enter the 8-digit code.